All You Need To Know About Choosing The Right Compressed Air Dryer

A compressed air dryer is mandatory to avoid rust and condensation problems. This helps remove water from your compressed air. The compressor sucks in 20 liters of air per second. The compressor removes moisture from the air, which causes dehydration.

Dryer dryers should be used for applications requiring flow rates above 100 scfm and dew points below -40°F/°C. You can also look for the best refrigerated air dryers through the web.

Refrigerated Air Dryer

Image Source: Google

The four main types of compressed air dryers are refrigeration dryers, chemical dryers, and membrane dryers.

• Cooling dryers: They work by cooling the air to a low temperature and condensing most of the moisture. With the refrigeration dryer, it is impossible to reach the dew point below freezing.

• Chemical dryers: These dryers use the process of applying compressed air to a layer of chemicals, usually calcium chloride and lithium chloride, which attract moisture.

Desiccant dryers: These dryers allow compressed air to flow over the dryer layer which absorbs moisture molecules. When the layer capacity is nearly saturated, the flow is diverted to the second layer of dry matter. Then the first bed was remade.

• Membrane Dryers: These are specially formulated membrane micro-tubes that are selectively permeable to moisture. Microtubes provide an excellent environment for generating dry air from standard compressed air.

Drying systems containing only additional coolant and a pooling filter can cause condensation problems after additional coolant. Use the "drying effect" of reducing pressure.

Choosing The Right Compressed Air Dryer For Your Industry

An industrial compressed air dryer is a must to avoid rust and condensation problems. This helps remove water from your compressed air. The compressor draws 20 liters of air per second. 

The compressor removes moisture from the air, resulting in a dryer. You can also buy refrigerated air dryer through various online sites.

Compressed Air Dryer

Image Source: Google

The main types of compressed air dryers are:

• Refrigerated dryer: They work by cooling the air to a low temperature and condensing most of the moisture. With the refrigeration dryer, it is impossible to reach the dew point below zero.

• Chemical dryers: These use a process in which compressed air is passed through a layer of chemicals, usually calcium chloride and lithium chloride, which attract moisture.

• Desiccant dryers:  This dryer directs compressed air to the dryer layer which absorbs moisture molecules. When the layer capacity is nearly saturated, the flow is diverted to the second drying layer.

• Membrane dryer: These are specially formulated membrane microtubes that are selectively permeable to moisture. The micro-tube provides an excellent environment for producing dry air from standard compressed air.

A drying system containing only one additional coolant and a pooling filter can cause condensation problems behind the cooler.

Therefore, the above points should be considered when choosing a compressed air dryer for your industry.

How To Treat Compressed Air

Treating compressed air requires the use of particle filters and filter coalescing in a compressed air system. Particulate filters are mainly used to remove contaminants of solid particles up to 5 microns.

Particulate filters are mostly used in industrial applications that need clean compressed air. Examples include, but are not limited to, air motor, air tools, air hoists, air spray weapons, air exercise, and other pneumatic or air equipment. 

Particles act as abrasives in internal parts in pneumatic equipment; Therefore clean compressed air shipping is very important to extend equipment life. If you want to know more about the air compressors, visit https://compressedair.net.au/screw-air-compressors/.

Image Source Google

How do particulates work? Because the wet and dirty air is directed down and outside in a circular motion with a baffle in the form of a turbine, liquid particles and gross separate. Liquid and particles flow to the bottom of the bottom bowl to dry. The air filtered partly then passes the 5-micron filter media element.

What is the right way to measure the particulate filters? Wilkerson particle filters are specially sized based on airflow and pressure, and also useful for entering information such as temperature and pipe sizes. 

If the filter is small, it will cause a decrease in pressure. As a practical rule, its size so that the decrease in pressure is no more than 2.5 PSIG to avoid high operating maintenance costs.